• Dodge Caliber Security SKIM Key Delete

Q&A

There are no questions for this product.

Dodge SKIM (Sentry Key Immobilizer Module) Disable / Reset 

Did you recently replace a PCM/ECU only to find that the engine started then died, even after the computer was properly reprogrammed? If so, you may also have a bad SKIM module which would cause the vehicle to not start. This service is for the removal of the SKIM security programming found on Chrysler, Dodge and Jeep engine computers. You may also have to Reset the SKIM in the PCM if too many attempts were made while diagnosing a failed SKIM module (7 attempt).

What MoPower Can Offer
If you would like to remove SKIM from a car, we reprogram the Dodge computers to remove the SKIM feature then rewrite the VIN back to the computer. This will be a permanent solution for PCM replacements that had no start conditions.

** You must unplug the SKIM module before installing a PCM that has had the SKIM security cleared. The SKIM module must remain unplugged for the SKIM feature to remain inactive.

** This service does not work for WIN (Wireless Ignition Node) equipped vehicles. The keyless start systems operate differently and are not part of the SKIM system.

How SKIM Works
Every Dodge PCM is capable of SKIM security, even if the vehicle is not equipped. The computer looks for the SKIM security signal when the key is turned on. If that signal is found, SKIM security is now activated in the PCM and the computer will now always look for the SKIM module. SKIM cleared PCM's can also be started with both security and non-security keys.

Security Light Woes
Some vehicles may still illuminate the security light after having the SKIM  Cars equipped with SKIM that have had security deleted, you will find the security light may illuminate. Unfortunately, the only solution for this is to remove the security light from the speedometer or dash. (most common in Jeeps)

Is This Service Plug-n-Play?
For most customers, the SKIM cleared PCM can be installed with no additional procedures. Some users may find that a global code clear may be required before the vehicle will start.

Please make sure to include Full Name, Address and VIN number in the box with the ECU. Failure to do so will result in delays.

Write a review

Please login or register to review

Dodge Caliber Security SKIM Key Delete

  • Brands Dodge
  • Product Code: CALIBER-SKIM-REMOVAL
  • Availability: In Stock
  • $149.99

  • Ex Tax: $149.99

Available Options


Related Products

Flash Ecu to Stock

Flash Ecu to Stock

Why would you need a Flash to Stock service?You PCM has an unknown calibration in it.You purchased a PCM off the internet and it does not have the correct calibration for your vehicleYou just got a new handheld to tune your car or truck with and it throws an error saying it already has a Diablo tune..

$59.99 Ex Tax: $59.99

Dodge Caliber VIN Flash Reprogram

Dodge Caliber VIN Flash Reprogram

Just need an ECU re-flashed with your specific Vehicle Identification Number (VIN)? We can handle it.By sending your ECU to us, we can flash your VIN into the ECU. The proper VIN ensures that all factory security measures function as they should and the vehicle starts and operates normally.Contact u..

$79.99 Ex Tax: $79.99