MoPower Calibrations provides professional mail-in PCM/ECU programming for supported Dodge Ram Truck applications. This service is for return-to-stock calibration work, software recovery, failed flash recovery, and corrupted or incorrect calibration recovery where the controller and application are supported.
If your Ram Truck is currently tuned, loaded with an unwanted aftermarket calibration, or needs a known factory-stock calibration, this service can restore a supported stock tune or perform a factory stock reflash.
An interrupted flash, failed write, tuner error, or corrupted calibration can leave a PCM or ECU incomplete, unresponsive, or unable to run the vehicle correctly. For supported Dodge Ram Truck controllers, MoPower can attempt bench/mail-in programming recovery and stock file recovery.
No communication with the PCM, lost communication with the ECU, scan tool communication problems after flashing, or a no-start after failed programming can have more than one cause. Wiring, power, grounds, CAN/network faults, physical controller failure, or other vehicle problems can create similar symptoms. This service addresses supported programming and software-recovery cases only.
This service can help when a compatible controller has an incorrect calibration, modified calibration, corrupted calibration, unsuccessful tuning write, or incorrect software loaded for the application.
This is a mail-in service. After ordering, ship your ECU/PCM to MoPower and include your full name, return shipping address, and vehicle VIN number in the box. Missing information can delay service. Return shipping is charged with the order; shipping the ECU/PCM to MoPower is the customer responsibility.
Current canonical Vehicle Finder coverage for this Factory Stock / Recovery product includes 1996-2010 Dodge Ram Truck applications. Eligible engines include: 3.7L V6, 3.9L V6, 4.7L V8, 5.2L V8, 5.7L HEMI V8, 5.9L Cummins Diesel, 5.9L Magnum V8, 6.7L Cummins Diesel, 8.0L V10, 8.3L V10. Engine families include: Cummins, Cummins ISB, Dodge truck/Viper V10, HEMI, Magnum V6, Magnum V8, PowerTech, Viper V10.
This is a PCM/ECU programming and software-recovery service. It does not repair physically damaged circuit boards or guarantee recovery of a controller with an electrical hardware failure.
Tags: Dodge Ram Truck PCM recovery, Dodge Ram Truck ECU recovery, Dodge Ram Truck stock reflash, Dodge Ram Truck flash ECU to stock, Dodge Ram Truck flash PCM to stock, MoPower Calibrations
Verified Service Review
The entire process and service was top notch. The best. Highly recommend. Everything was explained before I purchased. All pros and cons were well explained. The mailing instructions, time to complete, and return m...
Verified Service Review
Everything went well and my customer is happy.
Verified Service Review
Have sent multiple ecms in and everything is top notch. Will continue to use for all computer needs. Perfect service. Thank you again for all the help
Verified Service Review
bought a locked smarty for $125 and got it unlocked for much cheaper than buying any new smarty. after receiving my smarty, i was able to easily update my ecm. great work. great price. also website looks much cleaner now...
Verified Service Review
Another flawless execution! Plug and Play.
Verified Service Review
Kevin is amazing my 2015 jeep wrangler would run hot the fan wouldn't turn on till 226 degrees and if I used the A/C it would get hotter then that so I installed a 195 thermostat and sent my computer to mopower and ...
Verified Service Review
Absolutely thrilled with the un-marry service provided. Thought for sure I was out $600.00, but when I got it back, it was like new!! Couldn't be happier! Thanks so much!
Verified Service Review
I had the ECM go bad on my 2004 Dodge RAM 3500 Cummins Diesel. I was fortunate enough to be able to find a used ECM that matched my truck. As you probably know, if you're reading this review, an ECM has to be programed t...
Verified Service Review
After driving my Grand Cherokee a few years using the manual shift process to dull the effects of the MDS system, I got serious and did a mechanical upgrade, new cam, Hell Cat lifters, timing components, along with oil a...
Verified Service Review
Great company. Mailed my PCM/ECM directly to them to have to have it flashed. Only took a week from the west coast . It was returned promptly after programed and pats removed. Installed directly back into the truck. Star...